wer234发帖:1
发送消息  该帖被浏览 739 次,回复 0 次
发表于:2014-01-18 14:41
楼主
下载了RIGOL DS5062CA labview的驱动,找了其中的一个例子,不知道为什么不能运行总是报错=》(可能原因The ID Query failed.  This may mean that you Selected the wrong instrumentOryour instrument did not respond.  You may also be using a model that is not officially supported by this driver.  If you are sure that you have Selected the correct instrument And it is responding, try disabling the ID Query.
完整调用链:
    Rigol DS5062CA.lvlib:Initialize.vi
    Rigol DS5062CA Acquire Multiple Waveforms.vi)
请问一下是哪里的原因,或者是怎么找错!
谢谢了!!

 
       
     
您需要登录后才可以回复 登录 | 立即注册

 
发帖说明:如果不能直接拷贝粘贴到编辑框中,请在编辑框中点击右键选粘贴也可粘贴拷贝内容!